IMS Force Measuring System Strip- / Web-tension Meter Metal Service Centres

Force Measuring System
Strip-Tension /
Web-Tension Meter

Force Measuring System
Strip-Tension /
Web-Tension Meter

MS force measuring systems measure strip tension continuously and in real time.

Strain-gauge based force transducers are mounted underneath the bearing housings to measure the reaction force as a function of the wrap angle of the measuring roll.

Optional wrap angle compensation is available for use of a strip tension measuring system to control strip tension during coil winding.

measurement of the horizontal or vertical force

calculation of the strip tension in dependance on the
wrap angle

Special Features

Get in touch with our IMS Expert

Uwe Fliegenschmidt

Reserve your personal consultation appointment now!

Choose between a scheduled call back, a Teams video conference or simply use our contact form.

We look forward to hearing from you!

IMS Force Measuring System Strip- / Web-tension Meter Metal Service Centres

Force Measuring System
Strip-Tension /
Web-Tension Meter

Force Measuring System
Strip-Tension /
Web-Tension Meter

Technical Information

Force Transducer HMK / VMK

Nominal sensitivity:

0.5 mV/V

Non – Repeatability / – Linearity:

≤ 0.05 % / ≤ 0.2 %

Zero drift:

≤ 50 ppm / °C

Limit – / Breaking – load:

800 % / 1,200 %

Operating temperature / Protection class:

-10 ..+80 °C / IP67

EDS (Electronic Data Sheet):

yes

Measuring Amplifier MMV

Input channels:

2 optionally 4

Permitted bridge resistance:

≥ 175 Ω

Excitation voltage / Measuring range per channel:

0..15 VDC / ± 0.125..2 mV/V (programmable)

Resolution A/D (input) – / D/A (output) converter:

± 3.2767 digit

Sampling rate per channel:

up to 1,000 per second

Length of transducer cable:

≤ 30 m

Operating temperature / Protection class:

-10 ..+60 °C / IP65

EDS (Electronic Data Sheet) Function:

yes

Wide range of fieldbus modules available:

EtherCat, Profi bus-DP, Profinet, Ethernet I/P (others on request)

Analog outputs:

2 (current ± 20 mA or voltage ± 10 V)

Digital in- / output:

each 4

Operating voltage (mains voltage):

24 VDC (0,2 A)
optionally 85-264 VAC 50-60 Hz (0.8 A)

Measure.Inspect.Detect.

Product Catalogue for Metal Service Centres

  • Learn more about the product portfolio of our high-precision measuring systems for metal service centres
  • Standard systems for measurement and detection of thickness, width, slit strip width, sheet geometry, holes, pinholes, flatness, evenness, edgecracks, surface inspection, strip tension, web tension as well as various special systems
  • Special designs possible on customer request

IMS Measuring Systems for Metal Service Centres

Click on the button to load the content from imsmesssystemegmbh.pipedrive.com.

Load content